Follow us on:
All products, written information, testimonials, and other statements provided on this website have not been evaluated by the Food and Drug Administration. These products are not intended to diagnose, treat, cure, or prevent any disease. For all health concerns, please consult with an appropriate licensed healthcare practitioner.
|
Purification Process for Watt-Ahh®
The AquaNew Purification Process involves multiple proven purification stages and a new patent pending stage for restructuring the molecular foundation of Water. The result is Watt-Ahh®, Ultra-pure Polarized Water, that has all of the Benefits of Pure Water, plus additional treatments intended to provide good health and wellbeing. Our elaborate six-stage process as described below, involves over 24 hours of purification prior to bottling the first bottle of Watt-Ahh®. The resulting Watt-Ahh® has a high ORP (Oxidation Reduction Potential) which is above +480 without the addition of any oxidizing agents or caustic ingredients such as chlorine and ozone. Our unique water gas binds at the molecular level with the purified water to create small clusters or micro-clusters of water for more immediate inter- and intracellular absorption in the body. No chemicals, minerals or supplements are added. The resulting Ultra-pure Watt-Ahh® has a total dissolved solids (TDS) that averages less than 1.0 parts per million (ppm) which is of a higher quality than pharmaceutical grade water. Watt-Ahh® is the first type of its kind as being “polarized water” or a “linear-bonded water” that has multiple unique properties beyond other commercially available bottled water products such that Watt-Ahh® boils at a lower temperature and the water gas does not freeze at 32°F. We welcome you to review each stage of purification and fifth stage of polarization below. For each stage, we reference proven sources on the contaminants that are removed. We carefully monitor the operation of each treatment device at the water plant. Throughout the Fifth Stage of water gas infusion, we frequently measure drop in TDS and capacitance. Lower capacitance over bubbling time is our reliance the clusters of water molecules are becoming smaller as the gas binds with the ultra-pure water, resulting in more efficient absorption of the Water in our bodies. It takes over 12 hours of bubbling water gas into 2,000 gallons of purified water to make Watt-Ahh®. Keystone Water Plant in Lake Placid, Florida worked with our company, AquaNew, for over 6 months to establish an exclusive purification line within the plant to produce Watt-Ahh®. Keystone owns a good quality spring named Kelley Spring, that produces relatively clean water averaging 25 ppm TDS. The spring is unique in Southeastern U.S. as well as Central Florida for its relatively low bromine level. Other bottled water products may start with spring, well or tap water with significantly higher suspended solids over 500 ppm TDS as well as higher levels of bromine. Cleaner initial water from Kelley Spring, after 4 Stages of Purification described below, renders the ultra-pure water to become more absorbent of our unique water gas infusion (refer to Stage 5 below). |
|||||||||||||||||||
|
of PurificationParticulate and Carbon Filtration Spring water is delivered to the Water Plant |
Contaminate Removal
|
|
of PurificationReverse OsmosisReverse osmosis uses pressure that allows passage of water through a semi-permeable membrane but not ions and larger organic molecules such as urea. After Stage #1 (initial filtration), the filtered water is passed through a semi-permeable membrane that removes dissolved solids and results in reducing the TDS reading from 25.0 ppm to an average of 5.0 ppm. |
Contaminate Removal
|
|
of PurificationDeionizationDeionization is a chemical-free process for producing high-purity water using ion exchange, resins and electricity. The absence of chemicals makes deionization the preferred process for producing pharmaceutical grade water and water for microelectronic use. Water is passed through two beds of resins. This process creates a higher level of water purity by removing any ions (including minerals) that the previous reverse osmosis process (Stage #2) is unable to remove. Deionization reduces the TDS from 5 ppm to approximately 1.0 ppm. The low TDS level is needed to create pure water for the efficient binding of the water gas (Stage #5 below). |
Contaminate Removal
|
|
of PurificationSteam (“Vapor”) DistillationDistillation is the process for removal of volatile components by passing steam through heated water, followed by condensation of the steam. It is used to purify water and remove undesirable flavors. Since pharmaceutical grade water, typically made through deionization (Stage #3 above), can have a metallic taste, our water is vapor distilled to “sweeten” the natural taste of pure water. No sugars or minerals are added. |
Contaminate Removal
|
|
of PurificationPending Patent Polarization ProcessFor over 12 hours, purified water is bubbled with SG Gas authorized through a proprietary licensing agreement with WIT International, LLC of Sarasota, FL. This proprietary process involves no carbonation, acoustical energy shockwaves, ultraviolet treatment, radio waves, oxygenation, or varying levels of pressurization. The linear-form of the water molecule created by our water gas system, readily binds with the ultra-pure water through ambient pressure and infusion of the gas via diffusers ranging from 1 to 4 microns in size, located at the bottom of a 2,000 gallon tank of purified water. Watt-Ahh® is energized water which we describe as “Polarized” or “Hydro-fortified” Water. |
Contaminate Removal
|
|
of PurificationFinal FiltrationPrior to bottling Watt-Ahh®, the water is passed through a 1-micron filter as a final protection for our customers against bacteria and any other contamination. No nitrogen or oxygen is added to the Water which is used in the bottling industry to keep plastic bottles firm to facilitate shipping. A video on the labeling of Watt-Ahh® bottles can be viewed on this link. |
Contaminate Removal
|
Source of References:
Stage #1 (Particulate and Carbon Filtration)
Visit U.S. Environmental Protection Agency (EPA) website (www.epa.gov/safewater)
Stage #2 (Reverse Osmosis)
Other Contaminant Removal via Reverse Osmosis: Aluminum, Ammonium, Bicarbonate, Cadmium, Calcium, Chromate, Chromium, Copper, Ferro cyanide, Hardness (Ca & Mg), Magnesium, Manganese, Nickel, Nitrate, Phosphate, Polyphosphate, Pyrogen, Radioactivity, Silica, Silicate, Silver, Sulfate, Sulphate, Virus and Zinc.
Visit Center for Disease Control and Prevention website (www.cdc.gov)
Stage #3 (Deionization)
Visit Siemens website (www.usa.siemens.com).
Stage #4 (Vapor Distillation)
Center for Disease Control and Prevention website (www.cdc.gov)
Stage #5 (Pending Patent Polarization Process)
WIT International, LLC website (www.wateriontechnologies.com)
|
